 |
||
|
|
|
| BERTScope: BERTScope S l BERTScope SPG l BERTScope DPP
BERTScope DCRJ l BERTScope CRJ l BERTScope CR BERTScope PLA BitAlyzer: BitAlyzer 1500 |
||
 |
||
|
|
The flagship BERTScope has everything you will need to perform receiver compliance testing, transmitter compliance testing, and advanced analysis. Featuring easy and flexible stress testing, physical layer analysis such as BER Contour and Jitter measurements, and a Compliance Contour view for Mask Test, it represents a breakthrough in insight and saved development time. Compliance Contour is a bridge between BER and mask testing, needed because of the requirements of standards such as OIF CEI and XFP/XFI. These new standards require compliance to masks at BER levels of 10-12, a feat beyond the capabilities of a sampling oscilloscope.
| |
BERTScope S Application Overview |
||
BERTScope bridges the gap between eye diagram analysis with BER pattern generation. Finally, bit error ratio detection can be performed quickly, accurately, and thoroughly. BERTScope samples data and enables you to easily isolate problematic bit and pattern sequences. Seven types of advanced error analysis are built into one robust solution for unprecedented statistical measurement depth. |
For serial data applications, the new model BERTScopes provide great flexibility in clocking. This includes many new clock divide ratios, in addition to the ability to add stress to an external clock — even one with spread spectrum clocking imposed on it. Jitter tolerance testing is now a snap with onboard template testing. It all adds up to an even smarter way of getting your job done the fastest way possible. |
|
| BERTScope SPG | ||
|
SyntheSys Research introduces the latest member of the BERTScope family. The BERTScope SPG is a BERTScope pattern generator with the ability to add stress impairments to an internal or external clock. This makes it a cost-effective solution for testing in applications where non-BER measurements are used to calibrate the DUT, and BER is measured by the DUT itself or a legacy BERT. It is also ideal for production testing where stress is to be set up for multiple test stations.
|
| |
| BERTScope DPP | ||
The BERTScope DPP is the first 12.5 Gb/s instrument solution capable of programmable three-tap or four-tap |
|
|
| BERTScope DCRJ | ||
The BERTScope Digital Communications Receiver (DCRJ) optical reference receiver is a flexible, multi-functional instrument that complements the powerful signal integrity analysis capabilities of the BERTScope S. The DCRJ is designed for 10 Gb/s telecommunications testing, possessing both optical and single-ended electrical data inputs. Combine the DCRJ with the BERTScope S 12500B signal integrity analyzer for the ability to look deeper into device performance. Generate, measure, and analyze jitter from 5 kHz to >80 MHz to test compliance, characterize performance and design margin, and to precisely see and troubleshoot device behavior. Whether calibrating a stressed eye or measuring a compliance mask at 10-12 BER levels, the DCRJ is the perfect complement to the BERTScope for greater insight in optical serial data applications. The stressed output of the BERTScope and DCRJ also enable jitter transfer and jitter tolerance measurements, providing the complete suite of telecom jitter measurements. |
|
|
| BERTScope PLA | ||
|
|
|
Of all the methods for testing PLL compliance in PCIe components and add-in cards, the BERTScope PLA analysis instruments are the easiest to set up and use. Simply connect four cables to the Compliance Base Board, plug the instrument’s USB cable into any PC, load the software, and you are up and testing. No specialized instrument setups or calibration runs are required. Pass-Fail determination is just as easy. The simplified user interface allows any user to quickly get the compliance test results they need, without complicated cursor setup or interpretation that is required using other methods. |
| BERTScope CRJ | ||
|
The new BERTScope™ CRJ Variable Clock Recovery Jitter Analyzer is based on our BERTScope CR, the highest performance instrumentation-grade adjustable clock recovery product available today. The CRJ retains all of the functionality of the current BERTScope CR, with additional Jitter Analysis capabilities
|
| |
| BERTScope CR | ||
|
The BERTScope™ CR, BERTScope™ CR HS (High Sensitivity), and CRJ (Jitter Analyzer) are fully flexible clock recovery instruments designed to make compliance testing of today’s communication devices easy and exact. With jitter being such a complex and contentious parameter, each clock recovery instrument is intended to make compliance testing simple, repeatable, and accurate. |
| |
| BitAlyzer 1500 | ||
| This system is the world's first bit error rate test system combined with an eye pattern display and automatic jitter measurements, all in one chassis. The BA1500's rapid eye mask test is another feature that adds to the efficiency of this cost-effective unit. This ultimate physical layer test system comes standard with our patented BitAlyzer® Error Analysis™, which provides detailed analysis of a data stream's errors. Another benefit to this multi-function system is the unit's flexibility, including differential and single-ended I/O that supports variable amplitude, offset, and threshold. |
|
|
HTML Datasheet
PDF
Datasheet
